#-*-makefile-*-################################################
#
#  Mac-on-Linux configuration file (molrc)
#
#  MOL looks for this resource file in the following places
#
# 	$MOLRC			(if started as root)
#	/etc/molrc-hostname
#	/etc/molrc
#
#  All paths are relative to the 'lib' folder, normally 
#  /usr/lib/mol/ or /usr/local/lib/mol/
#
###############################################################


####################################
# ROM support
####################################

# 	If newworld_boot is set to yes, then MOL boots from a file-ROM 
#	(also called "newworld" ROM). The file-ROM image is simply a copy of the 
#	file "MacOS ROM" and can be copied from the System Folder (MacOS 8.6 or later).
#	The ROM file might be missing on non-G3 machines if MacOS was installed
#	with the "minimal installation" option checked (you can use free application
#	'tome viewer' to extract the file from the MacOS installer).
#
#	IMPORTANT: Currently it is necessary to strip the first 0x4000 bytes 
#	from the newworld image. This is done with the command 
#	'strip_nwrom org_romimage destimage'.
#
#	Newworld booting currently does not work on 601-based machines (but 
#	the built-in ROM should work for these machines)
#
newworld_boot:	yes
newworld_rom:	rom/rom.nw		# path to the stripped ROM-image


#	To boot from a Boot-ROM (not a newworld_boot), set newworld_boot
#	above to 'no'. The following *only* applies to Boot-ROMs. 
#
# 	You should in general use a ROM-image and an oftree description 
# 	file from the same machine, or from a closely related machine.
# 	If no ofree image is available (or if it doesn't work),
# 	try all the files in the oftrees directory /usr/lib/mol/oftrees.
#
# 	If the lines below are commented, then the ROM/oftree of the
# 	machine running the software will be used (see doc/mol/Status
# 	for more information)
#
#	Also, remember to set 'processor' below to 4.
#
#	Note: Do NOT use the "strip_nwrom" command on non-newworld images!
#

rom_image:	rom/rom.8500
oftree:		oftrees/oftree.8500


####################################
# Emulation parameters
####################################
#
# 	1=601, 2=602, 3=603, 4=604, 8=750 (G3)
#
# 	NOTE [Boot-ROMs only]: 603 machines should specify 8 (or 4). Also
#	some boot-ROMs might not run in G3 mode (if so, run in 604 mode instead).

# You should **ALMOST ALWAYS** specify 8 for 'processor'. If this is
# not done, the DOZE function will not work (a System 8.6 feature, causing
# MOL to sleep when MacOS is inactive).

processor:	8	# Should almost *ALWAYS* be 8 <------------
ram_size:	96	# You might want to increase this


####################################
# HFS volumes
####################################
#
# blkdev:	device	flags
#
# Device can for instance be /dev/hda, /dev/hda6 or /dev/sda4.
# The following flags are supported:
#
# 	-rw/-ro		read-write / read-only [default]
#	-force		use this flag to mount non-HFS partitions
#	-cd		CD (in principal the same as -ro)

blkdev:         /dev/loop0        -rw
blkdev:         /dev/hda5        -ro
#blkdev:         /dev/sda        -rw
#blkdev:         /dev/sdb        -rw
blkdev:        /dev/cdrom      -force

# Note 1: You probably want to change the entries above to something
# like 'blkdev /dev/hda6 -rw'. Use pdisk/disklabel to find out
# what partition numbers your HFS volumes have. If you do not
# change this, then the volume might be end up locked even if
# it is unmounted in certain situations.
#
# Note 2: Which volume MacOS tries to boot from is dependent
# upon the order of the blkdev lines above.

####################################
# Mouse
####################################
#
# One of the following mouse settings should probably be used:
#
#	 device		protocol
#	-------------------------
#	 /dev/usbmouse,	  usb
#	 /dev/adbmouse,	  adb
#	     -		console

#mouse_device:	/dev/usbmouse	
mouse_protocol:		console		# usb (ps2), adb, console


####################################
# Ethernet
####################################

disable_osi_enet:   	no
enet_interface:     	eth0


#######################################
# Video configuration
#######################################

# Startup resolution and depth (used as a hint only)
resolution:		1024/768/75		# width/height[/Hz]
depth:			15			# 

# The fb.modes file contains a description of the full-screen 
# video modes the monitor supports.  Do 'man fbset' and  
# 'man fb.modes' for more info. A sample fb.modes file is 
# included in the /usr/doc/mol/extra/ directory.
# 
# 	The /etc/fb.modes file might need some configuration.
#	At least, incompatible modes should be removed
#	(or MOL might try to use an incompatible video mode)
#
vmode_database:		/etc/fb.modes

# X-display to be used ($DISPLAY is used if commented)
#xdisplay:		remote.host.address:0.0

start_on_console:	no	# switch to console initially
autoswitch_console:	yes	# allow automatic switch to console
enable_console_video:	no	# 'no' to disable full-screen (console) video
enable_xvideo:		yes	# 
use_backing_store:	no	# Set to 'yes' only if the X-server is remote.
#vt:			9	# VT-number to use for full-screen video


####################################
# Misc
####################################

logfile:	/tmp/mol-logfile	# only used in debugger mode